K&N Oil Filter (HF655) Honda

K&N Oil Filter (HF655) HondaIn the early 1960s two motorcycle racers Ken Johnson and Norm McDonald (K&N) developed a ground breaking new idea for an air filter. After experimenting with numerous types of filter media they discovered that an oiled cotton design allowed the filter to not only capture contaminants very efficiently but also allowed it to be washed and reused and the original K&N High Flow Air Filter was born. Five decades later K&N is still innovating industry

TOTAL LENGTH (from leg top to wheel axle centre) approx 540mm DISTANCE BETWEEN UPPER AND LOWER CLAMP approx 145mm DIAMETER OF FORK LEG FOR THE CLAMP approx 28mm DIAMETER OF THE HEAD STEM BOLT approx 23

KILL SWTICH + START BUTTON PLUG (4 PIN FEMALE)

14mm LENGTH OF PISTON PIN approx 40

SKU:S114 + PE09-D + TOP-110B-PINK Brand New Plastics Fairing Fender Cover Kit Set + Seat + Fuel Tank For 110cc 125cc Quad Dirt Bike ATV 4 Wheelers

SKU:T224-RED `0

For zumo XT2 users a high-current power cable and Y-adapter are required (each sold separately)

HANDLEBAR MOUNT 1-1/8 TAPER ADAPTOR SIL

Rack kit contains tie rod end and shaft that connects to the steering rack as well as the outer tie rod end boot and the required hardware for one side

SKU:TCK-01__LTL

0:1 Power max 6

Brand New Engine AC Wiring Harness Wiring Loom for 150cc - 250cc PIT Trail Dirt Quad Bike ATV Go Kart Dune Buggy

High-quality tie rod upgrade replacement ends from All Balls