Bando TL30H150 TL Timing Belt Pulley (2012) Centrifugal BlowersBando TL30H150 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
8 SERVICE FACTOR AMPS PRIMARY 3
Zinc Plated Steel
00 FRAME 254TY BLANK 55C AMB AT 1
HEX WSHR SLTD PK1143 8 X 8 X 8 SERVICE DEPT BOX *order Qty750
09P011T040 HP 15 VOLTS 200 AMP 42 RPM 1765 FRAME 254T SER
lb Locked rotor torque 160 % Breakdown torque 220 % Locked rotor time 21s (cold) 12s (hot) Moment of inertia (J) 50
35F883Z808G1 HP 2 VOLTS 208-230/460 AMP 5
6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code K Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 14 AWG Motor Type 3752M Mounting Arrangement F1 Number of Poles 4 Overall Length 21
2x(Code F) No load current 4
33 % Rated voltage 460 V Rated current 31
Bando - 6PK1107A Features:
Rise @ Rated Load 39° C Start Configuration DOL Break-Down Torque 13
