Trapeze Tailpiece Short Option:Chrome

Trapeze Tailpiece Short Option:ChromeThis is a short version of the standard ES 335 style tailpiece which was also used on many arched top instruments. Important Specs. and measurements: Overall length of Tailpiece not including hinge = 3 1 8 inches Side to Side width at bar = 3 9 32 inches Width of string bar = 47 64 inches String Spacing at Bar = 1 61 64 inches Important Hinge Mounting Specs: Mounting Area of Hinge length = 1 1 2 inches Mounting Area of Hinge Width 2 inches Mounting

armstrongpickups

Aluminium U channel has a 5mm steel rod inside

weight and materials of the original '54 Leo Fender design was a prime concern and was achieved quite easily

This bridge is dual string loading

Collar Height = 25/64 in

Its coil is voiced for a generous low end

Relic "butterfly" string retainer with screw and derlin spacer

5mm overall length

the four holes for securing the neck to the guitar body are drilled but all other holes such as the ones for bridge mounting

This is not a replacement part for American Standard or American Deluxe bass guitars

Complete with two nuts and washers

Conversion to 3 Saddle design is required for the Bigsby to work properly