Bando 3-5MS425 Banflex Combo W01 BRAKE MOTOR

Bando 3-5MS425 Banflex Combo W01 BRAKE MOTORBando 3 5MS425 Ideally suited for short center distances and small diameter pulleys, BanFlex Combos banded construction minimizes or eliminates the turnover problem normally associated with small cross section belts. The ribbed construction provides superior flexibility while maintaining lateral stability. Precision molded, seamless polyurethane ribs provide maximum resistance to oil and traditional lubricants with virtually vibration free operation.

Frame 404/5HP Output 100 HP (75 kW) Number of Poles 2 Frequency 60 Hz Rated speed 3545 rpm Slip 1

7 LB-FT Locked-Rotor Torque 96 LB-FT Starting Current 279 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

DRX28324T-5 HP 30 VOLTS 575 AMPS 26 RPM 3520 HZ 60 SER

Frame 444/5TS Output 125 HP Number of Poles 2 Frequency 50 Hz Rated speed 2965 rpm Slip 1

Bando - 7C225 To resolve problem applications where belts are flipping over or jumping out of the sheaves

Catalog Number EM3611T-5G Enclosure TEFC Frame 182T Frame Material Steel Frequency 60

625 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1425 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings

Amperes 1904 A LRC 6

3 Adjustable lugs

3 Speed (RPM) 3

0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code F Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 6 AWG Motor Type 4462M Mounting Arrangement F1 Number of Poles 4 Overall Length 33

6 POLES 2 NUMBER SPEEDS 1 RPM 3495 RPM 2 3495 RPM 3 3460 RPM 4 2920 RPM 5 2920 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 208-230/460 VOLTS 460 VOLTS 2 230 VOLTS 3 208 VOLTS 4 380 VOLTS 5 190 FRME 184 SHAFT CODE JP MOUNTING HORZ-FOOTLESS ASSEMBLY POSITION NA MOTOR TYPE FDF1 OPPOSITE END BEARING 6206-2Z-J/C3 SHAFT END BEARING 6207-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1