Bando 600-S14M-1190 C-X Ceptor TB CLOSE COUPLED ODPBando 600 S14M 1190 C X High torque power transmission : Ceptor X provides higher torque and higher power transmission than normal trapezoidal teeth due to the mesh theory of the unique curvilinear teeth and has achieved high torque and high power transmission by using high rigidity and high elasticity components. Although it varies depending on the field, it has a 2. 7 fold or more transmission capacity compared to normal STS. Low noise : As the belt
6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty KVA Code N Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 18 AWG Motor Type 0522M Mounting Arrangement F3 Number of Poles 4 Overall Length 14
73 % Rated voltage 400/690 V Rated current 133/77
@ 25° C 53 Ohms A Ph / 0 Ohms B Ph Temp
Frame 445/7TS Output 250 HP (185 kW) Number of Poles 2 Frequency 50 Hz Rated speed 2962 rpm Slip 1
Bando - 7D180 To resolve problem applications where belts are flipping over or jumping out of the sheaves
624 IN Shaft Ground Indicator Shaft Grounding Shaft Rotation Reversible Speed 1785 rpm Motor Standards NEMA Thermal Device - Bearing None Thermal Device - Winding Normally Closed Thermostat Drawings
Break-Down Torque 567 LB-FT Pull-Up Torque 316 LB-FT Locked-Rotor Torque 366 LB-FT Starting Current 492 A Full Load Torque 0 LB-FT No-Load Current 0 A Line-Line Res
Load 84° C Start Configuration DOL Break-Down Torque 87
83 % Rated voltage 380 V Rated current 20
EL11319M SPEC
7 kW) Number of Poles 2 Frequency 50 Hz Rated speed 2950 rpm Slip 1
lb Locked rotor torque 220 % Breakdown torque 260 % Locked rotor time 57s (cold) 32s (hot) Moment of inertia (J) 53
