Steel String Tuners 6 On a Plate Fretwire

Steel String Tuners 6 On a Plate Fretwire6 on a plate guitar machine heads with oval metal chrome buttons. Mounting screws and push fit bushings are included. Important Dimensions: Post center to center = 1 inch (25. 4mm) Post diameter = 6mm Center to center mounting hole spacing = 1 inch (25. 4mm) Mounting hole diameter = 2. 5mm Post height = 27mm

These TonePros System II Components are the same that you will find installed on the top new guitars direct from the factory

The overall smaller size of the tuner button is ideal for providing more space in between buttons for easier tuning

Ideal for heavy Rock and Metal

8 mm for vintage peg holes to accommodate vintage style Kluson tuners

The base of this nut is tapered/angled

which produce a smooth even magnet field

The result is a confident

Now you can install a Bigsby Vibrato on your guitar without drilling any holes

5mm trem arm with metal tip

250K ohm pan pot control for use between 2 single coil pick-ups

Similar in tone to the HPAN-1 with a slight increase in high end

The socket that is supplied cannot be used as a strap button so you would need to purchase an alternative socket that allows this and then solder the socket to the cable